Description
The Cisco Catalyst 3650 Series Switch, with Cisco StackWise-160 Technology, can stack 9 switches and support up to 160 Gpbs stack bandwidth. The WS-C3650-24TS-E integrates with 24 Ethernet ports and 4 x 1G SFP uplink ports in IP Service feature set.
Quick Specs
Figure 1 shows the appearance of the Cisco C3650-24TS-E switch.

Table 1 shows the Quick Specs.
| Product Code | WS-C3650-24TS-E |
| Enclosure Type | Rack-mountable – 1U |
| Feature Set | IP service |
| Uplink Interfaces | 4 x 1G SFP |
| Ports | 24 x 10/100/1000 Ethernet ports |
| Maximum stacking number | 9 |
| Stack bandwidth | 160 Gpbs |
| Forwarding Bandwidth | 41.66Mpps |
| Switching Capacity | 88 Gbps |
| RAM | 4 G |
| Flash Memory | 2G |
| Number of AP per switch/stack | 50 |
| Number of wireless clients per switch/stack | 1000 |
| Dimensions | 44.5 cm x 44.5 cm x 4.4 cm |
| Package Weight | 17.49 Kg |
Product Details
Figure 2 shows the front panel of the Cisco C3650-24TS-E switch.

Note:
| ① | Mode button | ④ | USB Type A storage port |
| ② | Status LEDs | ⑤ | 24 x 10/100/1000 Ports |
| ③ | USB mini-Type B (console) port | ⑥ | Uplink ports |
Figure 3 shows the back panel of the Cisco C3650-24TS-E switch.

Note:
| ① | Ground connector |
| ② | CONSOLE (RJ-45 console port) |
| ③ | MGMT (RJ-45 10/100/1000 management port) |
| ④ | Fan module |
| ⑤ | Power supply modules |
Figure 4 shows the StackWise-160 Kit.
IP service feature set can only stack with other 3650 series in IP service feature set, in order to stack with LAN/IP base feature set, IP service feature set need to configure in LAN/IP base feature set (Stack module purchase separately).

The Modules, Licenses and Accessories
Table 2 shows some modules, licenses and accessories of this switch.
| Models | Description |
| C3650-STACK-KIT | Cisco Catalyst 3650 Stack Module Spare |
| PWR-C2-250WAC= | 250W AC Config 2 Secondary Power Supply |
| CAB-CONSOLE-RJ45 | Console Cable 6ft with RJ45 and DB9F |
| CAB-CONSOLE-USB | Console Cable 6 ft with USB Type A and mini-B |
Compare to Similar Items
Table 3 shows the comparison between WS-C3650-24TS-E and WS-C3650-24TS-S.
| Models | WS-C3650-24TS-E | WS-C3650-24TS-S |
| Feature Set | IP Services | IP Base |
| Uplink Interfaces | 4 x 1G SFP uplink ports | 4 x 1G SFP uplink ports |
| Ports | 24 x 10/100/1000 Ethernet ports | 24 x 10/100/1000 Ethernet ports |
Get more information
Do you have any question about the Cisco C3650-24TS-E switch
WS-C3650-24TS-E Specification
WS-C3650-24TS-E Specifications |
|
| Switching capacity | 176 Gbps on 48-port models (non-multigigabit models)
92 Gbps on 24-port models (non-multigigabit models) 254 Gbps on 24-port Multigigabit models with 2x10G uplink 272 Gbps on 24-port Multigigabit models with 4x10G uplink 392 Gbps on 48-port Multigigabit models with 4x10G uplink 472 Gbps on 48-port Multigigabit models with 8x10G uplink 472 Gbps on 48-port Multigigabit models with 2x40G uplink |
| Stacking bandwidth | 160 Gbps |
| Total number of MAC addresses | 32,000 |
| Total number of IPv4 routes (ARP plus learned routes) | 24,000 |
| FNF entries | 48,000 flow on 48-port models
24,000 flows on 24-port models |
| DRAM | 4 GB |
| Flash | 2 GB (non-Multigigabit models) and 4GB (Multigigabit models) |
| VLAN IDs | 4,094 |
| Total switched virtual interfaces (SVIs) | 1,000 |
| Jumbo frame | 9198 bytes |
| Total routed ports per 3650 stack | 208 |
| Number of access points per switch/stack | 25 |
| Number of wireless clients per switch/stack | 1000 |
| Total number of WLANs per switch | 64 |
| Wireless bandwidth per switch | Up to 40 Gbps on 48-port models
Up to 20 Gbps on 24-port models |
| Supported Aironet access point series | 3700, 3600, 3500, 2600, 1600, 1260, 1140, 1040 |
| Forwarding Rate | 77.37 Mpps |
| Dimensions (H x W x D) | 1.73 x 17.5 x 17.625 Inches |
| Weight | 16.75 |
| MTBF Hours | 383,760 |





Reviews
There are no reviews yet.