Cisco Switch Catalyst 2960 WS-C2960XR-48FPD-I

Cisco Switch Catalyst 2960 WS-C2960XR-48FPD-I

Catalyst 2960-XR-L3, managed, 48 x 10/100/1000 (PoE+) + 2 x SFP+, desktop, rack-mountable, PoE+

 

Category:

Description

Cisco Catalyst 2960-XR series switches offer power resiliency with optional dual field-replaceable power supplies and IP Lite Cisco IOS software with dynamic routing and Layer 3 features. WS-C2960XR-48FPD-I is one of 2960-XR switches, IP Lite switch, supporting forty-eight 10/100/1000 Ethernet ports with POE+ and two 10G SFP+ uplink interfaces. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM stub, etc.

Quick Specs

Table 1 shows the Quick Specs.

Product Code WS-C2960XR-48FPD-I
Enclosure Type Rack-mountable – 1U
Feature Set IP Lite
Uplink Interfaces 2 x 10G SFP+
Ports 48 x 10/100/1000 (POE+)
Available PoE Power 740W
Forwarding Bandwidth 108Gbps
Maximum stacking number 8
Stack bandwidth 80G
Switching Bandwidth 216Gbps
RAM 512 MB
Flash Memory 128 MB
Dimensions 44.5 cm x 40.8 cm x 4.45 cm

Product Details

Figure 1 shows the front panel of WS-C2960XR-48FPD-I.

WS-C2960XR-48FPD-I Front Panel

Note:

·There are Forty-eight 10/100/1000 Ethernet Gigabit Ports and two 10G SFP+ uplink Ports on the front panel.

·Two USB Type A ports and one USB mini-Type B (console) port are on the left.

·This switch offers one RJ-45 console port and one Ethernet management port on the left of the front panel.

·Power over Ethernet Plus(PoE+) supports up to 740W of PoE budget for 24 ports with 30W per port or 48 ports with 15.4W per port.

Figure 2 shows the back panel of WS-C2960XR-48FPD-I.

WS-C2960XR-48FPD-I Back Panel

Note:

① FlexStack-Plus module slot and cover ④ PS OK LED
② Power supply slot (with blank module) ⑤ AC power connector on the power supply module
③ AC OK LED

The WS-C2960XR-48FPD-I supports stacking with the optional stack kit. It has the FlexStack-Plus module (hot-swappable) that inserts in the slot located in the switch rear panel, and a 0.5-meter FlexStack cable to connect the FlexStack-Plus module ports. The stack module should purchase separately.

The Accessories

Table 2 shows some accessories of WS-C2960XR-48FPD-I.

Models Description
C2960X-STACK Catalyst 2960-X FlexStack Plus Stacking Module
CAB-STK-E-0.5M Cisco FlexStack Stacking Cables
GLC-LH-SMD Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM
GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM
CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F
CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B

Compare to Similar Items

Table 3 shows the comparison of similar items.

Models WS-C2960XR-48FPD-I WS-C2960XR-48LPD-I
Ports 48 x 10/100/1000 (POE+) 48 x 10/100/1000 (POE+)
Available PoE Power 740W 370W
Uplinks 2 x 10 Gigabit SFP+ 2 x 10 Gigabit SFP+
Feature Set IP Lite IP Lite
FlexStack-Plus Stacking Optional Optional

Get more information

Do you have any question about the Cisco Catalyst 2960XR-48FPD-I switch?

WS-C2960XR-48FPD-I Specification

Model
WS-C2960XR-48FPD-I
Brand
Cisco
Enclosure type
Rack-mountable – 1U
Ports
48 x 10/100/1000 (POE+) + 2 x 10 Gigabit SFP+
Network management Interface
10/100 Mbps Ethernet (RJ-45)
Available PoE Power
740W
Forwarding bandwidth (Gbps)
108 Gbps
Maximum stacking number
8
Stack Bandwidth
80G
Forwarding Performance
130.9Mpps
Switching bandwidth
216 Gbps
Maximum active VLANs
1023
MAC Address Table Size
16K (default)
CPU
APM86392 600MHz dual core
RAM
512 MB
Flash Memory
128 MB
Status Indicators
Per-port status: Link integrity, disabled, activity, speed, and full duplex
System status: System, RPS, PoE, Stack link status, link duplex, and link speed
Console ports
USB (Type-B), Ethernet (RJ-45)
Expansion Slot(s)
1 FlexStack-Plus slot and 1 power redundant slot
Stack Modules
C2960X-STACK
Stacking cable
CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length
CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length
CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length
Power supply
PWR-C2-250WAC
Power Device
Power supply – redundant – plug-in module
Power Redundancy
optional
Voltage range (Auto)
110V-240V
Power Consumption Operational
0.89 kVA
Compliant Standards
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p CoS Prioritization
IEEE 802.1Q VLAN
IEEE 802.1s
IEEE 802.1w
IEEE 802.1X
IEEE 802.1ab (LLDP)
IEEE 802.3ad
IEEE 802.3af and IEEE 802.3at
IEEE 802.3ah (100BASE-X single/multimode fiber only)
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
RMON I and II standards
SNMP v1, v2c, and v3
IEEE 802.3az
IEEE 802.3ae 10Gigabit Ethernet
IEEE 802.1ax
System software
IOS IP Lite
License
ENERGY-MGMT, ENERGY-MGT-100-K9
Features
IP unicast routing protocols (Static, RIPv1, RIPv2, RIPng, EIGRP-Stub)
Advanced IP unicast routing protocols (OSPF for Routed Access)
EIGRPv3-Stub and PIMv6-Stub supported for IPv6
Equal-cost routing
Policy-based routing (PBR)
Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
Protocol Independent Multicast (PIM)
Network security
MAC-based VLAN assignment
Cisco TrustSec
Comprehensive 802.1X
IPv6 First-Hop Security
Device Sensor and Device Classifier
Cisco Trust Anchor Technology
Cisco Threat Defense
Private VLANs
Unicast Reverse Path Forwarding (uRPF)
Multidomain Authentication
Access Control Lists (ACLs)
Switched Port Analyzer (SPAN)
Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3)
TACACS+ and RADIUS authentication
MAC Address Notification
Multilevel security on console access
BPDU Guard
Spanning Tree Root Guard (STRG)
IGMP filtering
Management & Troubleshooting
Auto-MDIX
UDLD
IP SLA Responder
Layer 2 / IP Traceroute
SPAN
RSPAN
Express Setup
Device Manager
Cisco Network Assistant
Smartports + Advisor
Troubleshooting Advisor
Drag-and-drop Cisco IOS Upgrade
IP Address DHCP
Autoinstall with saved configuration
Configuration Replace
DHCP Auto Image Upgrade
DHCP Port Based Allocation
Error Disable MIB
Technical Support and Services
Cisco SMARTnet Service
Cisco Smart Foundation Service
Cisco Smart Care Service
Cisco SP Base Service
Cisco Focused Technical Support Services
Operating temperature up to 5000 ft (1500 m)
23°F to 113°F (-5°C to 45°C)
Operating temperature up to 10,000 ft (3000 m)
23°F to 104°F (-5°C to 40°C)
Short-term exception at sea level
23°F to 131°F (-5°C to 55°C)
Short-term exception up to 5000 ft (1500 m)
23°F to 122°F (-5°C to 50°C)
Short-term exception up to 10,000 ft (3000 m)
23°F to 113°F (-5°C to 45°C)
Short-term exception up to 13,000 ft (4000 m)
23°F to 104°F (-5°C to 40°C)
Storage temperature up to 15,000 ft (4573 m)
-13°F to 158°F (-25°C to 70°C)
Operating altitude
Up to 10,000 (Up to 3000 Meters)
Storage altitude
Up to 13,000 (Up to 4000 Meters)
Operating relative humidity
10% to 95% noncondensing
Storage relative humidity
10% to 95% noncondensing

Reviews

There are no reviews yet.

Be the first to review “Cisco Switch Catalyst 2960 WS-C2960XR-48FPD-I”

Your email address will not be published. Required fields are marked *

Related products